Telephony & Power Solution Modules

PoE Modules

Power over Ethernet (POE) Products

Ag8000 Series

The Ag8000 series of PoE modules are designed to extract power from a conventional twisted pair Category 5 Ethernet cable. The Ag8000 series are non-isolated therefore the 1500Vdc isolation barrier between the input and output must be done external plastic casing). Like the Ag9000 the Ag8000 only required one low cost external component. The Ag8000 is available in different voltage, power and package options to suite a wide range of applications. Between the three different voltage variants the output can be set to any voltage from 2.5V to 13V.

Ag8000 - Non-Isolated PoE module with integral Signaure recognition, class programming and dc/dc converter

Datasheet

Part Number Output Voltage Output Power

Ag8012-S 12V 12 Watts

Ag8005-S 5V 6 Watts

Ag8003-S 3.3V 5 Watts

Ag8012-D 12V 12 Watts

Ag8005-D 5V 6 Watts

Ag8003-D 3.3V 5 Watts

Ag8100 Series

The Ag8100 series of surface mount PoE modules are suitable for a wide range ofPoE applications, such as IP phones and gateways, web cameras and security cameras. These non-isolated modules only requiring four low cost external components and between the three different voltage variants the output can be set to any voltage from 2.5V to 14V.

Ag8100 - SMT Non-Isolated PoE module, with built-in signature recognition, class programming and dc/dc converter

Datasheet

Part Number	Output Voltage	Output Power
Ag8112-M	12V	12 Watts
Ag8105-M	5V	7 Watts
Ag8103-M	3.3V	5.25 Watts

Ag8200 Series

The Ag8200 series are high efficiency PoE modules available in two different package options. Similar to the Ag8100, these non-isolated modules only requiring four low cost external components and between the three different voltage variants the output can be set to any voltage from 2.5V to 14V.

Ag8200 - high efficiency Non-Isolated PoE module, with built-in signature chip, class programming and dc/dc converter

Datasheet

Shortform

Part Number Output Voltage Output Power

Ag8212-S 12V 12 Watts

Ag8205-S 5V 9 Watts

Ag8203-S 3.3V 6.6 Watts

Ag9000 Series

The Ag9000 series of PoE modules are designed to extract power from a conventional twisted pair Category 5 Ethernet cable, conforming to the IEEE 802.3af Power over Ethernet (PoE) standard. The Ag9000 is a complete solution that only requires one external component and provide a 1500Vdc isolation barrier between the input and output. The Ag9000 is available in several different voltage and power options to suite a wide range of applications.

Ag9000 - Isolated PoE module, with intergal signature chip, class programming and dc/dc converter

Datasheet

Part Number Output Voltage Output Power

Ag9120 12V 12 Watts

Ag9050 5V 9 Watts

Ag9033 3.3V 6 Watts

Ag9200 Series

The Ag9200 are a series of PoE modules that provide higher efficiency. They extract power from a conventional twisted pair Category 5 Ethernet cable, conforming to the IEEE 802.3af Power over Ethernet PoE standard. This is a total solution, including a 1.5kV isolation barrier between the input and output. The Ag9200 is designed to give more power in the 3V and 5V parts.

Ag9200 - Isolated PoE module, with intergal signature chip, class programming and dc/dc converter

Datasheet

Shortform

Part Number Output Voltage Output Power

Ag9205 5V 12 Watts

Ag9203 3V 10 Watts

Ag9300 Series

The Ag9312 module is ideal for Security Applications such as cameras where the standard 12 to 48V supply is used as a backup or as an installation option. The Ag9312 Power-over-Ethernet(PoE) module is designed to extract power from a conventional twisted pair Category 5 Ethernet cable, conforming to the IEEE 802.3af PoE standard. In addition to the POE input the Ag9312 also provides an auxiliary input that will accept a dc voltage from 12V to 48V or a comparable ac voltage (after external rectification).

Ag9312 - Isolated PoE module, with intergal signature chip, and ac & dc/dc converter

Datasheet

Shortform

Part Number	Output Voltage	Output Power
Ag9312	12V	12 Watts

Ag9400 Series

The Ag9400 series of PoE modules are designed to extract power from a conventional twisted pair Category 5 Ethernet cable, conforming to the IEEE 802.3af Power over Ethernet (PoE) standard. The Ag9400 is a complete low cost solution aimed at high volume IP Cameras or VoIP phones. The module is easy to use and requires minimal external components as well as providing a 1500Vdc isolation barrier between the input and output. The Ag9400 is available in several different voltage and power options to suite a wide range of applications.

Ag9400 - Isolated PoE module, with intergal signature chip, and dc/dc converter

Datasheet

Shortform

Part Number Output Voltage Output Power

Ag9424 24V 12 Watts

Ag9412 12V 12 Watts

Ag9405 5V 10 Watts

Ag9403 3.3V 6.6 Watts

Ag9500 Series

Ag9512 is a self-contained module for providing power to IP security cameras. It is designed in a format that is standard for IP cameras, including box cameras and dome cameras. The Ag9512 Power-over-Ethernet (PoE) module is designed to extract power from a conventional twisted pair Category 5 Ethernet cable, conforming to the IEEE 802.3af PoE standard.

Datasheet

Shortform

Part Number	Output Voltage	Output Power
Ag9512	12V	12 Watts

Ag5000 Series

The Ag5000 is a PoE+ module that can deliver up to 30 Watts of output power. This is ideal for applications such as IP Telephones, WiMAX access points, PTZ cameras and remote computer terminals. The Ag5000 solves the PoE+ supply configuration issue by using a unique dynamic input power sharing process. It automatically detects if the input power is being supplied from the data pair, the spare pair or both pairs. The module can also automatically detect input voltage imbalances and adjust load sharing accordingly. The modules dual inputs both conform to the IEEE 802.3af standard for signature recognition and class programming.

Ag5000 - Isolated PoE+ module, with intergal dual signature chip, and dc/dc converters

Datasheet

Shortform

Part Number Output Voltage Output Power

Ag5000 12V or 24V 30 Watts

Ag5100 Series

The Ag5100 is a PoE+ module that can deliver up to 30 Watts of output power. This is ideal for applications such as IP Telephones, WiMAX access points, PTZ cameras and remote computer terminals. The input Signature complies with both the IEEE802.3af and IEEE802.3at specifications and it is designed to meet the safety isolation requirements of IEEE802.3at

Ag5100 - Isolated PoE+ module, with intergal signature chip, and dc/dc converters IEEE802.3at compliant

Datasheet

Shortform

Part Number Output Voltage Output Power

Ag5100 12V or 24V 30 Watts

PA1212

The PA1212 is designed to supply power to an Ethernet device, such as a CCTV, IP camera, WiFi Access Point, or VoIP phone It removes the need for access to mains and a plug-top power supply. The unit connects to the PoE enabled Ethernet network via the standard Cat.5 cable and RJ45 connection, and separates the power from the data. Power and data are then presented separately on an RJ45 and a DC connector.

Datasheet

Shortform

Part Number Output Voltage Output Power

PA1212 12V 12 Watts

For the latest Power over Ethernet news, click here to visit our Power from Ethernet Website